carrier image

Tetrahedral and Triangle Methods

Meshing techniques using triangle or tetrahedral shaped elements.

MESHING
RESEARCH
CORNER

Araujo, Chrystiano and Waldemar Celes

    "Quadrilateral Mesh Generation with Deferred Constraint Insertion", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • quadrilateral mesh
    • triangular mesh
    • mesh with constraints
    Abstract
    Download Full Paper (Postscript Format)


Atalay, F. Betul and David M. Mount
    "The Cost of Compatible Refinement of Simplex Decomposition Trees", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.57-70, September 17-20 2006
    keywords:
    • compatible refinement
    • conformal mesh
    • decomposition tree
    • data structures
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Aubry, Romain, Kaan Karamete, Eric Mestreau, and Saikat Dey
    "Singularities in Parametric Meshing", 21st International Meshing Roundtable, Springer-Verlag, pp.225-241, October 7-10 2012
    keywords:
    • Parametric mesher
    • singular mapping
    • degeneracies
    • surface triangulation
    • advancing front method
    Abstract
    Download Full Paper (Postscript Format)


Bajaj, Chandrajit L., Edward J. Coyle and Kwun-Nan Lin
    "Surface and 3D Triangular Meshes from Planar Cross Sections", 5th International Meshing Roundtable, Sandia National Laboratories, pp.169-178, October 1996
    keywords:
    • medical
    • surface reconstruction
    • tetrahedron
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Baker, Timothy J.
    "Identification and Preservation of Surface Features", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.299-310, September 19-22 2004
    keywords:
    • surface triangulation
    • feature extraction
    • surface projection
    Abstract
    Download Full Paper (Postscript Format)


Baker, Timothy J.
    "Mesh Movement and Metamorphosis", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.387-396, October 7-10 2001
    keywords:
    • tetrahedra
    • mesh movement
    • adaptation
    • coarsening
    • refinement
    • moving boundary
    • metamorphosis
    Abstract
    Download Full Paper (Postscript Format)


Balendran, Bala
    "A Direct Smoothing Method For Surface Meshes", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.189-193, October 1999
    keywords:
    • mesh smoothing
    • direct method
    • surface mesh
    • quadrilateral
    • triangular
    Abstract
    Download Full Paper (Postscript Format)


Beatty, Kirk and Nilanjan Mukherjee
    "Flattening 3D Triangulations for Quality SurfaceMesh Generation", Proceedings, 17th International Meshing Roundtable, Springer-Verlag, pp.125-140, October 12-15 2008
    keywords:
    • flattening
    • free-boundary
    • interpolation
    • Langrange multipliers
    • parameterization
    • periodic
    • transfinite
    • triangle.
    Abstract
    Download Full Paper (Postscript Format)


Bedregal, Carlos, Maria-Cecilia Rivara
    "New Results on LEPP-Delaunay Algorithm for Quality Triangulations", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • Delaunay refinement
    • longest-edge refinement
    • longest-edge bisection
    Abstract
    Download Full Paper (Postscript Format)


Benitez, Domingo, Eduardo Rodriguez, Jose Maria Escobar, and Rafael Montenegro
    "Performance Evaluation of a Parallel Algorithm for Simultaneous Untangling and Smoothing of Tetrahedral Meshes", 22nd International Meshing Roundtable, Springer-Verlag, pp.579-598, October 13-16 2013
    keywords:
    • parallel
    • untangling
    • smoothing
    • tetrahedral meshes
    • performance
    Abstract
    Download Full Paper (Postscript Format)


Benoit Hudson, Gary Miller, and Todd Phillips
    "Sparse Voronoi Refinement", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.339-356, September 17-20 2006
    keywords:
    • vornonoi
    • polyhedra
    • sparse voronoi refinement
    • delaunay
    Abstract
    Download Full Paper (Postscript Format)


Benzley, Steven E., Ernest Perry, Karl Merkley, Brett Clark and Greg Sjaardema
    "A Comparison of All-Hexahedral and All-Tetrahedral Finite Element Meshes for Elastic and Elasto-Plastic Analysis", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.179-191, October 1995
    keywords:
    • error bounds
    • finite elements
    • hexahedron
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Berkhahn, Volker, Kai Kaapke, Sebastian Rath and Erik Pasche
    "A Hybrid Meshing Scheme Based on Terrain Feature Identification", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.129-146, September 11-14 2005
    keywords:
    • terrain feature analysis
    • breakline identification
    • hybrid
    • b-spline surfaces
    • irregular triangle meshes
    • hydrodynamic simulations
    Abstract
    Download Full Paper (Postscript Format)


Bernard, P.-E. and J.-F. Remacle, N. Kowalski, C. Geuzaine
    "Hex-dominant meshing approach based on frame field smoothness", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • hexahedral meshing
    • mixed hexahedral meshes
    • tetrahedra recombination
    Abstract
    Download Full Paper (Postscript Format)


Berndt, Markus and Mikhail Shashkov
    "Multilevel accelerated optimization for problems in grid generation", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.351-359, Sept. 2003
    keywords:
    • smoothing
    • optimization
    • multilevel methods
    • coarsening
    • untangling
    • triangle
    • anisotropy
    Abstract
    Download Full Paper (Postscript Format)


Berzins, M.
    "Solution-Based Mesh Quality for Triangular and Tetrahedral Meshes.", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.427-436, October 1997
    keywords:
    • quality
    • tetrahedra
    • triangle
    Abstract


Berzins, M.
    "Mesh Quality: A Function of Geometry, Error Estimates or Both", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.229-238, October 1998
    keywords:
    • quality
    • error estimates
    • metric
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Blandford, Daniel K., Guy E. Blelloch, David E. Cardoze and Clemens Kadow
    "Compact representations of simplicial meshes in two and three dimensions", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.135-146, Sept. 2003
    keywords:
    • compression
    • data structures
    • large meshes
    • mesh representation
    • tetrahedra
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Bloomenthal, Jules
    "Triangulation of Implicitly Defined Mid-Surfaces", 22nd International Meshing Roundtable, Springer-Verlag, pp.263-274, October 13-16 2013
    keywords:
    • triangulation
    • mid-surface
    Abstract
    Download Full Paper (Postscript Format)


Bogomolov, Konstantin
    "Robust Construction of 3-D Conforming Delaunay Meshes Using Arbitrary-Precision Arithmetic", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.183-202, September 11-14 2005
    keywords:
    • Delaunay
    • voronoi cells
    • arbitrary-precision arithmetic
    • CDT
    • constrained delaunay
    Abstract
    Download Full Paper (Postscript Format)


Borouchaki, H., F. Hecht, E. Saltel and P. L. George
    "Reasonably Efficient Delaunay Based Mesh Generator in 3 Dimensions", Proceedings 4th International Meshing Roundtable, Sandia National Laboratories, pp.3-14, October 1995
    keywords:
    • Delaunay
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Borouchaki, Houman, Pascal J. Frey and Paul Louis George
    "Unstructured Triangular-Quadrilateral Mesh Generation. Application to Surface Meshing.", 5th International Meshing Roundtable, Sandia National Laboratories, pp.229-242, October 1996
    keywords:
    • adaptivity
    • anisotropy
    • quadrilateral
    • surface meshing
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Borovikov, Sergey N., Igor A. Kryukov, and Igor E. Ivanov
    "An Approach for Delaunay Tetrahedralization of Bodies with Curved Boundaries", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.221-238, September 11-14 2005
    keywords:
    • Delaunay
    • curved boundary
    • boundary recovery
    • CDT
    • tetrahedra
    • parametric models
    Abstract
    Download Full Paper (Postscript Format)


Bossen, Frank, J. and Paul S. Heckbert
    "A Pliant Method for Anisotropic Mesh Generation", 5th International Meshing Roundtable, Sandia National Laboratories, pp.63-76, October 1996
    keywords:
    • anisotropy
    • bubble
    • sphere packing
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Branch, John, Flavio Prieto and Pierre Boulanger
    "A Hole-Filling Algorithm for Triangular Meshes Using Local Radial Basis Function", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.411-432, September 17-20 2006
    keywords:
    • hole filling
    • triangles
    • faceted surfaces
    • facet repair
    • dirty geometry
    Abstract
    Download Full Paper (Postscript Format)


Bronson, Jonathan R. and Shankar P. Sastry, Joshua A. Levine, Ross T. Whitaker
    "Adaptive and Unstructured Mesh Cleaving", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • Meshing
    • Tetrahedral
    • Multimaterial
    • Unstructured
    • Bounded
    • Quality
    Abstract
    Download Full Paper (Postscript Format)


Bronson, Jonathan R., Joshua A. Levine, and Ross T. Whitaker
    "Lattice Cleaving: Conforming Tetrahedral Meshes of Multimaterial Domains with Bounded Quality", 21st International Meshing Roundtable, Springer-Verlag, pp.191-209, October 7-10 2012
    keywords:
    • tetrahedral meshing
    • multimaterial
    • multi-label
    • biomedical
    • conformal meshing
    • watertight
    • mesh quality
    • bounded quality
    • adaptive meshing
    Abstract
    Download Full Paper (Postscript Format)


Bronson, Jonathan R., Shankar P. Sastry, Mark B. Kim, Joshua A. Levine, and Ross T. Whitaker
    "Towards tetrahedral meshing with decoupled element and boundary constraints", Research Notes, 22nd International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 13-16 2013
    keywords:
    • tetrahedral mesh generation
    • decoupled elements
    • boundary constraints
    Abstract
    Download Full Paper (Postscript Format)


Burgos, Manuel A., Roque Corral, Jaime Fern·ndez-CastaÒeda1, and CarlosLÛpez
    "Rapid Meshing of Turbomachinery Rows Using Semi-Unstructured Conformal Grids", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.93-108, September 17-20 2006
    keywords:
    • hybrid
    • delaunay
    • semi-unstructured
    • turbomachinery
    Abstract
    Download Full Paper (Postscript Format)


Cabello, Jean
    "Toward quality surface meshing", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.201-213, Sept. 2003
    keywords:
    • surface meshing
    • size map
    • curvature adaptation
    • triangle
    • domain decomposition
    Abstract
    Download Full Paper (Postscript Format)


Canann, Scott A., Joseph R. Tristano, Matthew L. Staten
    "An Approach to Combined Laplacian and Optimization-Based Smoothing for Triangular, Quadrilateral, and Quad-Dominant Meshes", 7th International Meshing Roundtable, Sandia National Labs, pp.479-494, October 1998
    keywords:
    • smoothing
    • Laplacian smoothing
    • optimization-based smoothing
    • triangle
    • quadrilateral
    • metric
    Abstract
    Download Full Paper (Postscript Format)


Cardoze, David E., Gary L. Miller, Mark Olah and Todd Phillips
    "A Bezier-Based Moving Mesh Framework for Simulation with Elastic Membranes", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.71-80, September 19-22 2004
    keywords:
    • Bezier triangles
    • B-Splines
    • moving meshes
    • immersed Boundary
    • navier-Stokes
    • blood flow
    • evolving meshes
    Abstract
    Download Full Paper (Postscript Format)


Cascon, J.M., R. Montenegro, J.M. Escobar, E. Rodriguez,and G. Montero
    "The Meccano Method forAutomatic Tetrahedral Mesh Generation ofComplex Genus-Zero Solids", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.463-480, October 25-28 2009
    keywords:
    • Tetrahedral mesh generation
    • local refinement
    • nested meshes
    • meshuntangling and smoothing
    • surface and volume parametrization.
    Abstract
    Download Full Paper (Postscript Format)


Castro-Diaz, M.J., F. Hecht, and B. Mohammadi
    "New Progress in Anisotropic Grid Adaptation for Inviscid and Viscous Flows Simulations", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.73-85, October 1995
    keywords:
    • adaptivity
    • anisotropy
    • CFD
    • Delaunay
    • metric
    Abstract
    Download Full Paper (Postscript Format)


Cavalcanti, Paulo Roma and Ulisses T. Mello
    "Three-Dimensinoal Constrained Delaunay Triangulation: A Minimalist Approach", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.119-129, October 1999
    keywords:
    • Delaunay
    • constrained triangulation
    • three-dimensional
    • industrial strength triangulations
    • tetrahedra
    • computational geometry
    Abstract
    Download Full Paper (Postscript Format)


Chen, Hao and Jonathan Bishop
    "Delaunay Triangulation for Curved Surfaces", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.115-127, October 1997
    keywords:
    • anisotropy
    • curvature
    • Delaunay
    • parametric mapping
    • Riemann
    • surface meshing
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Chen, Long
    "Mesh Smoothing Schemes Based on Optimal Delaunay Triangulations", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.109-120, September 19-22 2004
    keywords:
    • anisotropic mesh adaptation
    • Delaunay
    • Voronoi tessellation
    • smoothing
    Abstract
    Download Full Paper (Postscript Format)


Cheng, S.-W., T. K. Dey, and T. Ray
    "Weighted Delaunay Refinement for Polyhedra with Small Angles", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.325-342, September 11-14 2005
    keywords:
    • computational geometry
    • Delaunay refinement
    • sliver
    • weighted Delaunay triangulation.
    Abstract
    Download Full Paper (Postscript Format)


Chernikov, Andrey N. and Nikos P. Chrisochoides
    "Parallel 2D Graded Guaranteed Quality Delaunay Mesh Refinement", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.505-517, September 11-14 2005
    keywords:
    • parallel
    • Delaunay
    • refinement
    Abstract
    Download Full Paper (Postscript Format)


Chernikov, Andrey N., and Nikos P. Chrisochoides
    "Generalized Delaunay Mesh Refinement: From Scalar to Parallel", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.563-579, September 17-20 2006
    keywords:
    • parallel
    • delaunay
    Abstract
    Download Full Paper (Postscript Format)


Chrisochoides, Nikos and Demian Nave
    "Simultaneous Mesh Generation and Partitioning for Delaunay Meshes", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.55-66, October 1999
    keywords:
    • quality
    • partitioning
    • Delaunay
    • parallel
    Abstract
    Download Full Paper (Postscript Format)


Christian Sorger, Stefan Kollmannsberger, and Ernst Rank
    "Visual DoMesh - A meshing software for mixed high-order finite element discretization", Research Notes, 19th International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 3-6 2010
    keywords:
    • Mesh generation
    • high-order
    • tetrahedral
    • hexahedral
    Abstract
    Download Full Paper (Postscript Format)


Chudanov, Vladimir V., Anna E. Aksenova, Valerii A. Pervichko, Irina G.Plotnikova, Anton A. Korotkov
    "An Automatic Orthogonal/Cartesian Meshing With Local Refinement Tetrahedrons Near STL Boundary", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.99-110, October 7-10 2001
    keywords:
    • cartesian
    • structured
    • refinement
    • STL
    • orthogonal grids
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Coll, Narcis, Marite Guerrieri and J. Antoni Sellares
    "Mesh Modification Under Local Domain Changes", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.39-56, September 17-20 2006
    keywords:
    • Delaunay
    • triangle
    • Steiner points
    • refinement
    Abstract
    Download Full Paper (Postscript Format)


Conraud, Joel
    "Lazy Constrained Tetrahedralization", Proceedings 4th International Meshing Roundtable, Sandia National Laboratories, pp.15-26, October 1995
    keywords:
    • boundary-constrained
    • Delaunay
    • lazy-constrained
    • Steiner Points
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Contreras, David and Nancy Hitschfeld-Kahler
    "Generation of polyhedral Delaunay meshes", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • Delaunay tessellations
    • Polyhedral meshes
    • Octrees
    Abstract
    Download Full Paper (Postscript Format)


D'Azevedo, E. F.
    "On Adaptive Mesh Generation in Two Dimensions", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.109-117, October 1999
    keywords:
    • adaptivity
    • triangle
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


de Cougny, H. L. and M. S. Shephard
    "Surface Meshing Using Vertex Insertion", 5th International Meshing Roundtable, Sandia National Laboratories, pp.243-256, October 1996
    keywords:
    • curvature
    • parametric surface
    • quality
    • surface meshning
    • triangle
    • validity
    Abstract
    Download Full Paper (Postscript Format)


Dey, Sailkat, Robert M. O'Bara and Mark S. Shephard
    "Curvilinear Mesh Generation in 3D", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.407-417, October 1999
    keywords:
    • tetrahedra
    • coarse mesh
    • curvilinear mesh generation
    • computational geometry
    • p-version analysis
    Abstract
    Download Full Paper (Postscript Format)


Dey, T. K., G. Li, and T. Ray
    "Polygonal Surface Remeshing with Delaunay Refinement", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.343-362, September 11-14 2005
    keywords:
    • surface meshing
    • computational geometry
    • computational topology
    • Delaunay refinement
    Abstract
    Download Full Paper (Postscript Format)


Diaz-Morcillo, Alejandro, Agustin Bernal-Ros and Luis Nuno
    "Mesh Generation Methods Over Plane and Curved Surfaces", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.397-407, October 1998
    keywords:
    • quadrilateral
    • triangle
    • surface meshing
    • advancing front
    • transfinite interpolation
    • multiblock
    • structured
    • ruled surface
    • quadric surface
    • revolution surface
    Abstract
    Download Full Paper (Postscript Format)


Diaz-Morcillo, Alejandro, Luis NuÒo, Juan V. Balbastre and David S·nchez-Hern·ndez
    "Adaptive Mesh Refinement in Electromagnetic Problems", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.147-155, October 2000
    keywords:
    • adaptivity
    • refinement
    • error indicator
    • triangles
    • electromagnetics
    Abstract
    Download Full Paper (Postscript Format)


Djidjev, Hristo N.
    "Force-Directed Methods for Smoothing Unstructured Triangular and Tetrahedral Meshes", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.395-406, October 2000
    keywords:
    • smoothing
    • force-directed methods
    • unstructured
    • triangle
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Dompierre, Julien, Paul Labbe, Francois Guibault, Ricardo Camarero
    "Proposal of Benchmarks for 3D Unstructured Tetrahedral Mesh Optimization", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.459-478, October 1998
    keywords:
    • optimization
    • benchmark
    • quality
    • shape measure
    • metric
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Dompierre, Julien, Paul Labbe, Marie-Gabrielle Vallet and Ricardo Camarero
    "How to Subdivide Pyramids, Prisms, and Hexahedra into Tetrahedra", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.195-204, October 1999
    keywords:
    • pyramid
    • prism
    • hexahedra
    • tetrahedra
    • subdivision
    • conformity
    Abstract
    Download Full Paper (Postscript Format)


Durbeck, Lisa
    "Evaporation: a Technique for Visualizing Mesh Quality", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.259-265, October 1999
    keywords:
    • refinement
    • adaptivity
    • preprocessing
    • mesh visualization
    • quality
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Edelsbrunner, Herbert and Damrong Guoy
    "An Experimental Study of Sliver Exudation", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.307-316, October 7-10 2001
    keywords:
    • tetrahedra
    • weighted Delaunay triangulations
    • quality
    • slivers
    • dynamic triangulation
    • computer experiments.
    Abstract
    Download Full Paper (Postscript Format)


Edelsbrunner, Herbert and Roman Waupotitsch
    "Adaptive Simplicial Grids from Cross-sections of Monotone Complexes", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.253-266, October 1997
    keywords:
    • density
    • tetrahedra
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Elbert, Gregory J., David A. Field and William H. Frey
    "When Mesh Generators Require Enhancements", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.525-537, October 1998
    keywords:
    • triangle
    • smoothing
    • quality
    • enhancements
    Abstract


Engwirda, Darren
    "Multi-resolution unstructured grid-generation for geophysical applications on the sphere", 24th International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-14 2015
    keywords:
    • Geophysical Fluid Dynamics
    • Ocean Modelling
    • Atmospheric Modelling
    • Numerical Weather Prediction
    • Voronoi Tessellation
    • Frontal-Delaunay Mesh Generation
    Abstract
    Download Full Paper (Postscript Format)


Engwirda, Darren
    "Voronoi-based point-placement for three-dimensional Delaunay-refinement", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • Three-dimensional mesh generation
    • Delaunay-refinement
    • Advancing-front
    • Frontal-Delaunay
    • Off-centres
    Abstract
    Download Full Paper (Postscript Format)


Engwirda, Darren and David Ivers
    "Face-centred Voronoi refinement for surface mesh generation", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • Surface mesh generation
    • Delaunay-refinement
    • Frontal-Delaunay
    • off-centres
    Abstract
    Download Full Paper (Postscript Format)


Feng, Daming, Christos Tsolakis, Andrey N. Chernikov, Nikos P. Chrisochoides
    "Scalable 3D Hybrid Parallel Delaunay Image-to-Mesh Conversion Algorithm for Distributed Shared Memory Architectures", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • Parallel Mesh Generation
    • Delaunay Mesh Refinement
    • Scalability
    • Image-to-Mesh Conversion
    Abstract
    Download Full Paper (Postscript Format)


Flandrin, N., H. Borouchaki and C. Bennis
    "3D Hybrid Mesh Generation for Reservoir Flow Simulation", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.133-144, September 19-22 2004
    keywords:
    • computational geometry
    • hybrid mesh
    • power diagram
    • Delaunay
    • regular triangulations
    Abstract
    Download Full Paper (Postscript Format)


Fleischmann, Peter and Siegfried Selberherr
    "Three-Dimensional Delaunay Mesh Generation Using a Modified Advancing Front Approach", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.267-278, October 1997
    keywords:
    • advancing front
    • boundary constrained
    • Delaunay
    • semiconductor
    • slivers
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Fleishmann, Peter, Robert Kosik, and Siegfried Selberherr
    "Simple Mesh Examples to Illustrate Specific Finite Element Mesh Requirements", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.241-246, October 1999
    keywords:
    • Delaunay
    • finite element mesh
    • finite volume mesh
    • non-obtuse mesh elements
    • M-matrix
    Abstract
    Download Full Paper (Postscript Format)


Foteinos, Panagiotis and Nikos Chrisochoides
    "4D Space-Time Delaunay Meshing for Medical Images", 22nd International Meshing Roundtable, Springer-Verlag, pp.223-240, October 13-16 2013
    keywords:
    • Delaunay refinement
    • space-time
    • quality
    • fidelity
    Abstract
    Download Full Paper (Postscript Format)


Foteinos, Panagiotis, Nikos Chrisochoides
    "Dynamic Parallel 3D Delaunay Triangulation", 20th International Meshing Roundtable, Springer-Verlag, pp.3-20, October 23-26 2011
    keywords:
    • dynamic Delaunay triangulation
    • parallel
    • mesh generation
    Abstract
    Download Full Paper (Postscript Format)


Frey, Pascal J.
    "About Surface Remeshing", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.123-136, October 2000
    keywords:
    • surface remeshing
    • remeshing
    • triangles
    • triangulation
    • Hausdorff distance
    • decimation
    • adaptivity
    Abstract
    Download Full Paper (Postscript Format)


Frey, Pascal J. and Houman Borouchaki
    "Surface mesh evaluation", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.363-373, October 1997
    keywords:
    • quality
    • surface
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Frey, Pascal J. and Loic Marechal
    "Fast Adaptive Quadtree Mesh Generation", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.211-224, October 1998
    keywords:
    • triangle
    • quadtree
    • spatial decomposition
    • adaptivity
    Abstract
    Download Full Paper (Postscript Format)


Frey, Pascal J., Houman Borouchaki and Paul-Louis George
    "Delaunay Tetrahedralization using an Advancing-Front Approach", 5th International Meshing Roundtable, Sandia National Laboratories, pp.31-46, October 1996
    keywords:
    • adaptivity
    • advancing front
    • anisotropy
    • Delaunay
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Fuchs, Alexander
    "Automatic Grid Generation with Almost regular Delaunay Tetrahedra", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.133-148, October 1998
    keywords:
    • Delaunay
    • tetrahedra
    • almost regularity
    • ART
    Abstract
    Download Full Paper (Postscript Format)


Galtier, Jerome and Paul Louis George
    "Prepartitioning as a way to mesh subdomains in parallel", 5th International Meshing Roundtable, Sandia National Laboratories, pp.107-122, October 1996
    keywords:
    • Delaunay
    • domain decomposition
    • parallel
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Gargallo-Peiro, Abel, Xevi Roca, Jaime Peraire, and Josep Sarrate
    "Defining Quality Measures for Validation and Generation of High-Order Tetrahedral Meshes", 22nd International Meshing Roundtable, Springer-Verlag, pp.109-126, October 13-16 2013
    keywords:
    • validation
    • high-order
    • tetrahedral mesh generation
    Abstract
    Download Full Paper (Postscript Format)


Gargallo-Peiro, Abel, Xevi Roca, Josep Sarrate, and Jaime Peraire
    "Inserting curved boundary layers for viscous flow simulation with high-order tetrahedra", Research Notes, 22nd International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 13-16 2013
    keywords:
    • boundary layer
    • viscous flow simulation
    • high-order tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Garimella, Rao V. and Mark S. Shephard
    "Boundary Layer Meshing for Viscous Flows in Complex Domains", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.107-118, October 1998
    keywords:
    • tetrahedra
    • boundary layer
    • CFD
    • anisotropy
    • advancing layers
    Abstract
    Download Full Paper (Postscript Format)


George, Paul Louis
    "Tet Meshing: Construction, Optimization, And Adaptation", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.133-141, October 1999
    keywords:
    • tetrahedra
    • constrained triangulation
    • Delaunay
    • overview
    • adaptivity
    • optimization
    • smoothing
    Abstract
    Download Full Paper (Postscript Format)


George, Paul-Louis
    "Tet Meshing", 8th International Meshing Roundtable, unpublished, October 1999
    keywords:
    • tetrahedra
    • Delaunay kernel
    • in-sphere predicate
    • round-off errors
    • adaptivity
    Abstract


Goerigk, Nadja ,Hang Si
    "On Indecomposable Polyhedra and The Number of Steiner Points", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • Indecomposable polyhedron
    • Steiner point
    • Schönhardt polyhedron; Bagemihl’s polyhedron
    • tetrahedralization
    Abstract
    Download Full Paper (Postscript Format)


Guoy, Damrong and Jeff Erickson
    "Automatic Blocking Scheme for Structured Meshing in 2D Multiphase Flow Simulation", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.121-132, September 19-22 2004
    keywords:
    • multiblock structured mesh
    • medial axis
    • Delaunay
    • Voronoi diagram
    • Delaunay refinement
    • multiphase flow simulation
    Abstract
    Download Full Paper (Postscript Format)


Haimes, Robert and Michael J. Aftosmis
    "Watertight Anisotropic Surface Meshing Using Quadrilateral Patches", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.311-322, September 19-22 2004
    keywords:
    • surface triangulation
    • anisotropy
    • quadrilateral
    • CAD geometry
    • mapping templates
    Abstract
    Download Full Paper (Postscript Format)


Hervias, Carlos, Nancy Hitschfeld-Kahler, Luis E. Campusano, and Giselle Font
    "On Finding Large Polygonal Voids Using Delaunay Triangulation: The Case of Planar Point Sets", 22nd International Meshing Roundtable, Springer-Verlag, pp.275-292, October 13-16 2013
    keywords:
    • Delaunay triangulation
    • polygonal voids
    • astronomy
    Abstract
    Download Full Paper (Postscript Format)


Hitschfeld, Nancy and M. Cecilia Rivara
    "Non-Obtuse Boundary Delaunay Triangulations", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.391, October 1997
    keywords:
    • boundary constrained
    • Delaunay
    • LEPP
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Hitschfeld, Nancy, G. Navarro and R. Farias
    "Tessellations of Cuboids with Steiner Points", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.275-282, October 2000
    keywords:
    • control volume
    • cuboid tessellation
    • modified octrees
    • octree
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Huang, Weizhang, Lennard Kamenski,Hang Si
    "Mesh smoothing: an MMPDE moving mesh approach", 24th International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-14 2015
    keywords:
    • mesh smoothing
    • mesh optimization
    • moving mesh method
    • tetrahedral meshes
    Abstract
    Download Full Paper (Postscript Format)


Ito, Yasushi, Alan M. Shih and Bharat K. Soni
    "Reliable Isotropic Tetrahedral Mesh Generation Based on an Advancing Front Method", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.95-106, September 19-22 2004
    keywords:
    • advancing front
    • tetrahedra
    • isotropic tetrahedral mesh
    • biomedical
    • computed tomography
    • CT
    • magnetic resonance imaging
    • MRI
    Abstract
    Download Full Paper (Postscript Format)


Jonathan R. Bronson, Joshua A. Levine, and Ross T. Whitaker
    "Particle Systems for Adaptive, IsotropicMeshing of CAD Models", Proceedings, 19th International Meshing Roundtable, Springer-Verlag, pp.279-296, October 3-6 2010
    keywords:
    • Adaptive meshing
    • particle systems
    • tetrahedral meshing
    • CAD.
    Abstract
    Download Full Paper (Postscript Format)


Joshi, Bhautik and Sebastien Ourselin
    "BSP-Assisted constrained tetrahedralization", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.251-260, Sept. 2003
    keywords:
    • tetrahedra
    • computational geometry
    • Delaunay
    • boundary-constrained
    • BSP
    Abstract
    Download Full Paper (Postscript Format)


Jun Wang and Zeyun Yu
    "Adaptive and Quality Tetrahedral Mesh Generation", Research Notes, 19th International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 3-6 2010
    keywords:
    • BCC
    • tetrahedral mesh generation
    • adaptive mesh generation.
    Abstract
    Download Full Paper (Postscript Format)


Juretic, Franjo
    "An inside-out method for arbitrary polyhedra", 23rd International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-15 2014
    keywords:
    • Mesh Generation
    • Inside-out Meshing
    • Arbitrary Polyhedra
    • Tetrahedral Template;
    Abstract
    Download Full Paper (Postscript Format)


Kabaria, Hardik and Adrian J. Lew
    "Universal Meshes for computing with non-conforming tetrahedralization", Research Notes, 22nd International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 13-16 2013
    keywords:
    • non-conforming tetrahedralization
    Abstract
    Download Full Paper (Postscript Format)


Kabaria, Hardik and Adrian J. Lew
    "Universal Meshes: Computing Tetrahedralization Conforming to Curved Surfaces", 23rd International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-15 2014
    keywords:
    • tetrahedra
    • curved surfaces
    Abstract
    Download Full Paper (Postscript Format)


Kallinderis, Yannis, Aly Khawajat, Harlan McMorris, Stefan Irmisch and Donald Walker
    "Hybrid Prismatic/Tetrahedral Grids for Turbomachinery Applications", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.21-32, October 1997
    keywords:
    • CFD
    • mixed element
    • prism
    • surface meshing
    • tetrahedra
    • triangle
    • wedge
    Abstract
    Download Full Paper (Postscript Format)


Kamenski, Lennard and Hang Si
    "A study on generation of three-dimensional M-uniform tetrahedral meshes in practice", Research Notes, 22nd International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 13-16 2013
    keywords:
    • tetrahedral mesh generation
    • M-uniform tetrahedral mesh
    Abstract
    Download Full Paper (Postscript Format)


Keskin, Umit and Joaquim Peiro
    "A Level Set Method for the Construction of Anisotropic Boundary-Conforming Voronoi Regions and Delaunay Triangulations", Research Notes, 20th International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 23-26 2011
    keywords:
    • Voronoi diagrams
    • Delaunay triangulation
    • level set method
    • crystal growth
    • Riemannian metric
    • anisotropic meshes
    Abstract
    Download Full Paper (Postscript Format)


Khawaja, Aly, Yannis Kallinderis and Harlan McMorris
    "Adaptive Hybrid Grids for Diverse Industrial Applications", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.167-184, October 1998
    keywords:
    • hybrid
    • prism
    • tetrahedra
    • boundary layer
    • advancing layers
    Abstract
    Download Full Paper (Postscript Format)


Knupp, Patrick M.
    "Matrix Norms & The Condition Number: A General Framework to Improve Mesh Quality Via Node-Movement", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.13-22, October 1999
    keywords:
    • mesh optimization
    • shape measures
    • condition number
    • matrix norms
    • finite element mesh
    • tetrahedral mesh
    • hexahedral mesh
    • mesh untangling
    Abstract
    Download Full Paper (Postscript Format)


Krysl, Petr, Michael Ortiz
    "Generation of Tetrahedral Finite Element Meshes: Variational Delaunay Approach", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.273-284, October 1998
    keywords:
    • tetrahedra
    • boundary constraints
    • variational Delaunay
    Abstract
    Download Full Paper (Postscript Format)


Kumar, Amitesh, Alan Shih, Yasushi Ito, Douglas Ross and Bharat Soni
    "A Hole-filling Algorithm Using Non-uniform Rational B-splines", Proceedings, 16th International Meshing Roundtable, Springer-Verlag, pp.169-182, October 14-17 2007
    keywords:
    • Hole Filling
    • NURBS
    • Geometry Repair
    • Watertight
    • Mesh Generation
    • CFD
    • CSM
    • Delaunay Triangulation
    • Edge Swapping
    Abstract
    Download Full Paper (Postscript Format)


Landier, Sam
    "Boolean operations on arbitrary polyhedral meshes", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • Boolean Operations
    • Polyhedral Meshes
    • Cell Reconstruction
    • Conformity
    • Conservative Remapping
    • Cut-cell Meshing
    • Constrained Delaunay Triangulation
    Abstract
    Download Full Paper (Postscript Format)


Laug, Patrick and Houman Borouchaki
    "Molecular Surface Modeling and Meshing", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.31-41, October 7-10 2001
    keywords:
    • molecular surface
    • quality mesh
    • parametric surface
    • riemannian metric
    • advancing front
    • Delaunay
    Abstract
    Download Full Paper (Postscript Format)


Lemos, Thiago, Suneeta Ramaswami, Marcelo Siqueira
    "An Experimental Comparison of Algorithms for Converting Triangulations of Closed Surfaces into Quadrangulations", 24th International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-14 2015
    keywords:
    • triangulation
    • quadrangulation
    • graph matching
    • edge contraction
    • irreducible triangulation
    Abstract
    Download Full Paper (Postscript Format)


Leng, Juelin, Yongjie Zhang and Guoliang Xu
    "A Novel Geometric Flow-Driven Approach for Quality Improvement of Segmented Tetrahedral Meshes", 20th International Meshing Roundtable, Springer-Verlag, pp.347-363, October 23-26 2011
    keywords:
    • Segmented tetrahedral mesh
    • quality improvement
    • geometric flow-driven
    • optimization-based mesh smoothing
    • shape-preserving
    Abstract
    Download Full Paper (Postscript Format)


Li, Xiang-Yang
    "Spacing Control and Sliver-free Delaunay Mesh", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.295-306, October 2000
    keywords:
    • quality
    • Delaunay
    • slivers
    • computational geometry
    • algorithms
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Li, Xiang-Yang, Shang-Hua Teng and Alper Ungor
    "Biting Ellipses to Generate Anisotropic Mesh", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.97-108, October 1999
    keywords:
    • anisotropy
    • metrics
    • biting
    • advancing front
    • sphere packing
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Li, Xiang-Yang, Shang-Hua Teng and Alper Ungor
    "Biting Spheres in 3D", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.85-95, October 1999
    keywords:
    • quality
    • advancing front
    • plastering
    • sphere packing
    • biting
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Li, Xiang-Yang, Shang-Hua Teng, Alper Ungor
    "Simultaneous Refinement and Coarsening Adaptive Meshing with Moving Boundaries", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.201-210, October 1998
    keywords:
    • combustion
    • adaptivity
    • coarsening
    • refinement
    • moving boundary
    • sphere-packing
    • Delaunay
    Abstract
    Download Full Paper (Postscript Format)


Liao, Guojun,Xi Chen, Ben Hildebrandt
    "New Techniques for Grid Generation and Adaptation", 24th International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-14 2015
    keywords:
    • Mesh Deformation
    • Multi-block
    • Curved Triangles
    Abstract
    Download Full Paper (Postscript Format)


Liesen, J., E. de Sturler, A. Sheffer, Y. Aydin, and C. Siefert
    "Preconditioners for Indefinite Linear Systems Arising in Surface Parameterization", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.71-81, October 7-10 2001
    keywords:
    • surface parameterization
    • triangulation
    • flattening
    • linear systems
    • Krylov subspace methods
    • preconditioning
    • indefinite problems
    • parameterization
    Abstract
    Download Full Paper (Postscript Format)


Liu, Anwei and Matthias Horlacher
    "Tracking the Front of Moving Boundaries Using Grid GenerationTechniques", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.333-343, October 1999
    keywords:
    • moving boundary
    • refinement
    • adaptivity
    • semiconductors
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Liu, Anwei and Mazen Baida
    "How far flipping can go towards 3D conforming/constrained triangulation", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.307-315, October 2000
    keywords:
    • Delaunay
    • constrained triangulation
    • flipping
    • tetrahedral transformations
    • tetrahedra
    • boundary recovery
    Abstract
    Download Full Paper (Postscript Format)


Liu, Jianfei and Rongxi Tang
    "Ball-Packing Method: A New Approach for Quality Automatic Triangulation of Arbitrary Domains", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.85-96, October 1997
    keywords:
    • ball packing
    • density
    • line meshing
    • sphere packing
    • surface meshing
    • triangles
    Abstract


Liu, Jianfei and Shuli Sun
    "Small Polyhedron Reconnection: A New Way to Eliminate Poorly-Shaped Tetrahedra", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.241-258, September 17-20 2006
    keywords:
    • mesh improvement
    • tetrahedra
    • local transformation
    • optimal tetrahedralization
    • small polyhedron reconnection (SPR)
    • topology improvement
    Abstract
    Download Full Paper (Postscript Format)


Malanthara, Anish and Walter Gerstle
    "Comparative Study of Unstructured Meshes Made of Triangles and Quadrilaterals", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.437-447, October 1997
    keywords:
    • comparison
    • quadrilateral
    • quality
    • triangle
    Abstract


Marcum, David L.
    "Efficient Generation of High Quality Unstructured Surface and Volume Grids", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.distributed at conference, October 2000
    keywords:
    • surface meshing
    • tetrahedra
    • triangle
    • anisotropy
    • high aspect ratio
    • advancing front
    • advancing normal
    • local reconnection
    • AFLR
    • surface mapping
    • parameterization
    Abstract
    Download Full Paper (Postscript Format)


Maubach, Joseph M.
    "The Efficient Location of Neighbors for Locally Refined n-Simplicial Grids", 5th International Meshing Roundtable, Sandia National Laboratories, pp.137-156, October 1996
    keywords:
    • bisection
    • neighbors
    • refinement
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Mello, Ulisses T., Paulo Roma Cavalcanti
    "A Point Creation Strategy for Mesh Generation Using Crystal Lattices as Templates", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.253-261, October 2000
    keywords:
    • background mesh
    • crystal lattice
    • point placement
    • triangulation
    • Delaunay
    Abstract
    Download Full Paper (Postscript Format)


Merkley, Karl G. and Mark L. Dewey
    "A Comparison of Parametric Space vs. RealSpace Triangular Meshing Algorithms", Research Notes, 18th International Meshing Roundtable, Springer-Verlag, pp.21-26, October 25-28 2009
    keywords:
    • Triangle meshing
    • parametric space
    • advancing front mesh
    Abstract
    Download Full Paper (Postscript Format)


Miller, Gary L., Dafna Talmor, Shang-Hua Teng, Noel Walkington and Han Wang
    "Control Volume Meshes using Sphere Packing: Generation, Refinement and Coarsening", 5th International Meshing Roundtable, Sandia National Laboratories, pp.47-62, October 1996
    keywords:
    • coarsening
    • control volume
    • Delaunay
    • refinement
    • sliver
    • sphere packing
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Miller, Gary L., Steven E. Pav and Noel J. Walkington
    "When and why Ruppert's algorithm works", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.91-102, Sept. 2003
    keywords:
    • guaranteed quality
    • Ruppert's algorithm
    • triangle
    • computational geometry
    • Delaunay
    Abstract
    Download Full Paper (Postscript Format)


Miller, Gary L., Steven E. Pav, Noel J. Walkington
    "Fully Incremental 3D Delaunay Refinement Mesh Generation", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, September 15-18 2002
    keywords:
    • Delaunay Refinement
    • Delaunay Triangulation
    • Mesh Generation
    • Ruppert's Algorithm
    Abstract
    Download Full Paper (Postscript Format)


Mitchell, Curtis R., Gary S. Hufford, and Mahesh M. Athavale
    "Automated Semi-Structured Prismatic Grids For Brush Seals Analysis", Proceedings, 4th International Meshing Roundtable, Sandia National Laboratories, pp.205-215, October 1995
    keywords:
    • advancing front
    • triangle


Mitchell, Scott A.
    "The All-Hex Geode-Template for Conforming a Diced Tetrahedral Mesh to any Diced Hexahedral Mesh", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.295-305, October 1998
    keywords:
    • hexahedra
    • tetrahedra
    • conforming
    • transition
    • whisker weaving
    • geode template
    • Cubit
    Abstract
    Download Full Paper (Postscript Format)


Mitchell, Scott A. and Mohammed A. Mohammed, Ahmed H. Mahmoud, Mohamed S. Ebeida
    "Delaunay quadrangulation by two-coloring vertices", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • Delaunay
    • quadrangulation
    • graph coloring
    • disk packing
    • blue noise
    • random
    • advancing front
    Abstract
    Download Full Paper (Postscript Format)


Molino, Neil, Robert Bridson, Joseph Teran and Ronald Fedkiw
    "A crystalline, red green strategy for meshing highly deformable objects with tetrahedra", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.103-114, Sept. 2003
    keywords:
    • tetrahedra
    • level set methods
    • BCC lattice
    • red green refinement
    • large deformations
    • muscle simulations
    Abstract
    Download Full Paper (Postscript Format)


Montenegro, R., J.M. Cascon, J.M. Escobar, E. Rodriguez and G. Montero
    "Implementation in ALBERTA of an Automatic Tetrahedral Mesh Generator", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.325-338, September 17-20 2006
    keywords:
    • tetrahedra
    • Alberta
    • octree
    Abstract
    Download Full Paper (Postscript Format)


Montenegro, R., J.M. Escobar, G. Montero and E. Rodriguez
    "Quality Improvement of Surface Triangulations", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.469-484, September 11-14 2005
    keywords:
    • surface triangulations
    • quality improvement
    Abstract
    Download Full Paper (Postscript Format)


Mouton, T. and E. Bechet
    "Lloyd Relaxation using Analytical Voronoi Diagram in the L-infinity Norm and its Application to Quad Optimization", Research Notes, 21st International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 7-10 2012
    keywords:
    • Delaunay triangulation
    • Centroidal Voronoi Tesselations
    • Lloyd algorithm
    Abstract
    Download Full Paper (Postscript Format)


Murphy, Michael, Carl W. Gable
    "Strategies for Nonobtuse Boundary Delaunay Triangulations", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.309-320, October 1998
    keywords:
    • control volume
    • tetrahedra
    • Delaunay
    • geoanalysis
    Abstract
    Download Full Paper (Postscript Format)


Neugebauer, Friedhelm and Ralf Diekmann
    "Improved Mesh Generation: Not Simple but Good", 5th International Meshing Roundtable, Sandia National Laboratories, pp.257-272, October 1996
    keywords:
    • metric
    • provable angle bounds
    • quadtree
    • quality
    • rhomboidal quadtree
    • surface meshing
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Nivoliers, Vincent, Dong-Ming Yan and Bruno Levy
    "Fitting Polynomial Surfaces to Triangular Meshes with Voronoi Squared Distance Minimization", 20th International Meshing Roundtable, Springer-Verlag, pp.601-616, October 23-26 2011
    keywords:
    • Voroni Squared Distance Minimization
    • VSDM
    • Centroidal Voroni Tesselation
    • CVT
    • triangular meshes
    Abstract
    Download Full Paper (Postscript Format)


Ollivier-Gooch, Carl and Charles Boivin
    "Improved Cell Size and Grading In Guaranteed Quality Triangular and Tetrahedral Meshes", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.43-54, October 2000
    keywords:
    • simplicial mesh quality
    • quality guarantees
    • guaranteed quality
    • mesh resolution
    • mesh grading
    • traingle
    • tetrahedra
    • grading
    • resolution
    Abstract
    Download Full Paper (Postscript Format)


Oudot, Steve, Laurent Rineau, and Mariette Yvinec
    "Meshing Volumes Bounded by Smooth Surfaces", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.203-220, September 11-14 2005
    keywords:
    • Delaunay
    • Ruppert algorithm
    • provably-good mesh
    • sizing function
    • level sets
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steve J.
    "Constrained Triangulation: Application to Hex-Dominant Mesh Generation", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.31-41, October 1999
    keywords:
    • constrained triangulation
    • hex-dominant mesh generation
    • hexahedra
    • H-Morph
    • tetrahedral transformations
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J.
    "A Survey of Unstructured Mesh Generation Technology", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.239-267, October 1998
    keywords:
    • overview
    • classification
    • software
    • triangle
    • quadrilateral
    • tetrahedra
    • hexahedra
    • surface meshing
    • refinement
    • clean-up
    • smoothing
    • Delaunay
    • advancing front
    • octree
    • plastering
    • paving
    • whisker weaving
    • grid-based
    • indirect
    Abstract
    Download Full Paper (Postscript Format)


Pande, Sushrut, Supratim Biswas, Amitava De
    "GPU-Based Parallel Algorithms for Delaunay Mesh Refinement", 24th International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-14 2015
    keywords:
    • Graphics Processing Units
    • GPUs
    • Mesh Refinement
    • Parallel Algorithms
    • Delaunay Triangulation
    Abstract
    Download Full Paper (Postscript Format)


Pardue, Juliette ,Nikos Chrisochoides, and Andrey Chernikov
    "Parallel Two-Dimensional Unstructured Anisotropic Delaunay Mesh Generation for Aerospace Applications", 24th International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-14 2015
    keywords:
    • mesh generation
    • parallel
    • anisotropic
    • delaunay
    Abstract
    Download Full Paper (Postscript Format)


Pav, Steven E. and Noel J. Walkington
    "Delaunay Refinement by Corner Lopping", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.165-182, September 11-14 2005
    keywords:
    • simplicial
    • planar
    • curved boundary
    • Delaunay
    • corner lopping
    Abstract
    Download Full Paper (Postscript Format)


Pav, Steven E. and Noel J. Walkington
    "Robust Three Dimensional Delaunay Refinement", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.145-156, September 19-22 2004
    keywords:
    • tetrahedra
    • Delaunay
    • Ruppert's algorithm
    • refinement
    Abstract
    Download Full Paper (Postscript Format)


Pebay, Philippe P. and David C. Thompson
    "Parallel Mesh Refinement Without Communication", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.437-448, September 19-22 2004
    keywords:
    • adaptive tetrahedral tessellation
    • parallel mesh refinement
    • streaming subdivision
    • parallel
    Abstract
    Download Full Paper (Postscript Format)


Pebay, Philippe P. and Pascal J. Frey
    "A-priori Delaunay-conformity", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.321-333, October 1998
    keywords:
    • Delaunay
    • boundary constraint
    • surface triangulation
    Abstract
    Download Full Paper (Postscript Format)


Pebay, Philippe P., Timothy J. Baker
    "A Comparison Of Triangle Quality Measures", Proceedings, 10th International Meshing Roundtable, Sandia National Laboratories, pp.327-340, October 7-10 2001
    keywords:
    • metric
    • shape measure
    • quality
    • triangle quality
    Abstract
    Download Full Paper (Postscript Format)


Pellerina, Jeanne and Bruno LÈvy, Guillaume Caumon
    "Toward mixed-element meshing based on restricted Voronoi diagrams", 23rd International Meshing Roundtable, Elsevier Ltd., October 12-15 2014
    keywords:
    • restricted Delaunay triangulation
    • hybrid mesh
    • thin sections
    • prisms
    • B-Rep model
    • geological modeling
    Abstract
    Download Full Paper (Postscript Format)


Pellé, Aymeric, Monique Teillaud
    "Periodic Meshes for the CGAL Library", 23rd International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-15 2014
    keywords:
    • periodic mesh
    • flat torus
    • Delaunay refinement
    • software
    Abstract
    Download Full Paper (Postscript Format)


Plaza, Angel
    "Asymptotic Behavior of the Average of the Adjacencies of the Topological Entities in Some Simplex Partitions", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.233-240, October 1999
    keywords:
    • partitions
    • adjacencies
    • simplicial meshes
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Plaza, Angel and Graham F. Carey
    "About Local Refinement of Tetrahedral Grids based on Bisection", 5th International Meshing Roundtable, Sandia National Laboratories, pp.123-136, October 1996
    keywords:
    • adaptivity
    • bisection
    • refinement
    • tetrahedron
    Abstract
    Download Full Paper (Postscript Format)


Plaza, Angel and Maria-Cecilia Rivara
    "Mesh refinement based on the 8-tetrahedra longest-edge partition", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.67-78, Sept. 2003
    keywords:
    • refinement
    • LEPP
    • longest-edge bisection
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Plaza, Angel, Jose P. Suarez and Miguel A. Padron
    "Mesh graph structure for longest-edge refinement algorithms", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.335-344, October 1998
    keywords:
    • LEPP
    • triangle
    • data structure
    • longest-edge refinement
    Abstract
    Download Full Paper (Postscript Format)


PÈbay, Philippe P.
    "A New Approach Towards Delaunay-Conformity in 3 Dimensions", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.283-292, October 2000
    keywords:
    • triangulation
    • Delaunay
    • constrained triangulation
    • surface meshing
    Abstract
    Download Full Paper (Postscript Format)


Qian, Jin and Yongjie Zhang
    "Dual Contouring for Domains with Topology Ambiguity", 20th International Meshing Roundtable, Springer-Verlag, pp.41-60, October 23-26 2011
    keywords:
    • Dual Contouring
    • topology ambiguity
    • triangular mesh
    • tri-linear representation
    • saddle points
    Abstract
    Download Full Paper (Postscript Format)


Rand, Alexander and Noel Walkington
    "Collars and Intestines: Practical Conforming Delaunay Refinement", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.481-497, October 25-28 2009
    keywords:
    • Tetrahedral mesh generation
    • local refinement
    • nested meshes
    • meshuntangling and smoothing
    • surface and volume parametrization.
    Abstract
    Download Full Paper (Postscript Format)


Rassineux, A., P. Breitkopf, C. Chappuis, P. Villon
    "Volume Mesh Adaptation With a Meshfree Surface Model", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.253-260, September 15-18 2002
    keywords:
    • Tetrahedral meshes; mesh refinement; mesh adaptation
    Abstract
    Download Full Paper (Postscript Format)


Rassineux, A., P. Breitkopf, C. Chappuis, P. Villon
    "Volume Mesh Adaptation With a Meshfree Surface Model", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.253-260, September 15-18 2002
    keywords:
    • Tetrahedral meshes; mesh refinement; mesh adaptation
    Abstract
    Download Full Paper (Postscript Format)


Rees, Matthew
    "Combining Quadrilateral and Triangular Meshing Using the Advancing Front Approach", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.337-348, October 1997
    keywords:
    • advancing front
    • mixed elements
    • quadrilateral
    • surface
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Remacle, Jean-Francois, Vincent Bertranda, Christophe Geuzaine
    "A Two-Level Multithreaded Delaunay Kernel", 24th International Meshing Roundtable, Elsevier Ltd., October 12-14 2015
    keywords:
    • Delaunay triangulation
    • parallel computing
    • OpenMP
    Abstract
    Download Full Paper (Postscript Format)


Rivara, Maria-Cecilia
    "A Study on Delaunay Terminal Edge Method", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.529-542, September 17-20 2006
    keywords:
    • delaunay terminal edge method
    • LEPP
    Abstract
    Download Full Paper (Postscript Format)


Rivara, Maria-Cecilia
    "New Mathematical Tools and Techniques for the Refinementand/or Improvement of Unstructured Triangulations", 5th International Meshing Roundtable, Sandia National Laboratories, pp.77-86, October 1996
    keywords:
    • longest edge
    • refinement
    • surface meshing
    • tetrahedron
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Rivara, Maria-Cecilia and Nancy Hitschfeld
    "LEPP-Delaunay algorithm: a robust tool for producing size-optimal quality triangulations", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.205-220, October 1999
    keywords:
    • LEPP
    • Delaunay
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Rodriguez, Pedro A. and Maria-Cecilia Rivara
    "Multithread Lepp-Bisection Algorithm for Tetrahedral Meshes", 22nd International Meshing Roundtable, Springer-Verlag, pp.525-540, October 13-16 2013
    keywords:
    • Lepp-Bisection
    • multithread
    • tetrahedral meshes
    • refinement
    Abstract
    Download Full Paper (Postscript Format)


Sastry, Shankar P. and Robert M. Kirby
    "On Interpolation Errors over Quadratic Nodal Triangular Finite Elements", 22nd International Meshing Roundtable, Springer-Verlag, pp.349-366, October 13-16 2013
    keywords:
    • interpolation
    • quadratic nodal triangular elements
    Abstract
    Download Full Paper (Postscript Format)


Sazonov, Igor, Oubay Hassan, Kenneth Morgan and Nigel P.Weatherill
    "Smooth Delaunay-Voronoi Dual Meshes for Co-Volume Integration Schemes", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.529-542, September 17-20 2006
    keywords:
    • delaunay-voronoi
    Abstract
    Download Full Paper (Postscript Format)


Semenova, Irina B., Vladimir V. Savchenko and Ichiro Hagiwara
    "Two Techniques to Improve Mesh Quality and Preserve Surface Characteristics", Proceedings, 13th International Meshing Roundtable, Williamsburg, VA, Sandia National Laboratories, SAND #2004-3765C, pp.277-288, September 19-22 2004
    keywords:
    • surface meshes
    • quality
    • improvement
    • preserving surface characteristics
    • triangles
    Abstract
    Download Full Paper (Postscript Format)


Seveno, Eric
    "Towards an adaptive advancing front method", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.349-360, October 1997
    keywords:
    • advancing front
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Sheffer, Alla and E. de Struler
    "Surface Parameterization For Meshing by Triangulation Flattening", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.161-172, October 2000
    keywords:
    • parameterization
    • surface meshing
    • triangulation flattening
    • flattening
    Abstract
    Download Full Paper (Postscript Format)


Shephard, M.S., M.W. Beau and R.M. O'Bara
    "Revisiting the Elimination of the Adverse Effects of Small Model Features in Automatically Generated Meshes", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.119-132, October 1998
    keywords:
    • tetrahedra
    • small features
    • feature supression
    • geometry management
    Abstract
    Download Full Paper (Postscript Format)


Shewchuk, Jonathan Richard
    "Constrained Delaunay Tetrahedralizations and Provably Good Boundary Recovery", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.193-204, September 15-18 2002
    keywords:
    • finite element mesh generation
    • tetrahedral mesh generation
    • constrained Delaunay tetrahedralization
    • boundaryconformity
    • boundary recovery
    Abstract
    Download Full Paper (Postscript Format)


Shimada, Kenji, Atsushi Yamada and Takayuki Itoh
    "Anisotropic Triangular Meshing of Parametric Surfaces via Close Packing of Ellipsoidal Bubbles", Proceedings, 6th International Meshing Roundtable, Sandia National Laboratories, pp.375-390, October 1997
    keywords:
    • anisotropy
    • bubble
    • Delaunay
    • surface
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Shimada, Kenji, Jia-Huei Liao and Takayuki Itoh
    "Quadrilateral Meshing with Directionality Control through the Packing of Square Cells", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.61-76, October 1998
    keywords:
    • quadrilateral
    • directionality
    • Voronoi
    • Delaunay
    • bubble
    • physically-based
    Abstract
    Download Full Paper (Postscript Format)


Shontz, Suzanne M. and Stephen A. Vavasis
    "A mesh warping algorithm based on weighted Laplacian smoothing", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.147-158, Sept. 2003
    keywords:
    • moving meshes
    • optimization-based smoothing
    • smoothing
    • tetrahedra
    • cardiology
    • bio-medical
    • faceted surface representations
    Abstract
    Download Full Paper (Postscript Format)


Si, Hang
    "On Refinement of Constrained Delaunay Tetrahedralizations", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.509-528, September 17-20 2006
    keywords:
    • constrained delaunay
    • CDT
    • sizing function
    • provably-good
    Abstract
    Download Full Paper (Postscript Format)


Si, Hang and Jonathan Richard Shewchuk
    "Incrementally Constructing and Updating Constrained Delaunay Tetrahedralizations with Finite Precision Coordinates", 21st International Meshing Roundtable, Springer-Verlag, pp.173-190, October 7-10 2012
    keywords:
    • Constrained Delaunay triangulation
    • CDT
    • bistellar flip
    • cavity retriangulation
    Abstract
    Download Full Paper (Postscript Format)


Si, Hang and Klaus G®artner
    "Meshing Piecewise Linear Complexes by Constrained Delaunay Tetrahedralizations", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.147-164, September 11-14 2005
    keywords:
    • delaunay
    • constrained delaunay
    • CDT
    • cavity retetrahedralization
    Abstract
    Download Full Paper (Postscript Format)


Sifri, Oren, Alla Sheffer and Craig Gotsman
    "Geodesic-based surface remeshing", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.189-199, Sept. 2003
    keywords:
    • triangle
    • surface meshing
    • geodesic distance
    • faceted surface representations
    Abstract
    Download Full Paper (Postscript Format)


Simpson, Bruce
    "How Efficient are Delaunay Refined Meshes? An Empirical Study", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.215-238, September 17-20 2006
    keywords:
    • Delaunay refinement
    • empirical study
    • error measure
    • adaptive delaunay refinement
    Abstract
    Download Full Paper (Postscript Format)


Simpson, Bruce R.
    "Isolating Geometry in Mesh Programming", Proceedings, 8th International Meshing Roundtable, South Lake Tahoe, CA, U.S.A., pp.45-54, October 1999
    keywords:
    • manifold meshing
    • object oriented
    • Delaunay
    • Delaunay insertion
    • geometry management
    Abstract
    Download Full Paper (Postscript Format)


Simpson, Bruce, Nancy Hitschfeld and Maria-Cecilia Rivara
    "Approximate Quality Mesh Generation Based on Small Edge Details", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.411-421, October 2000
    keywords:
    • planar mesh
    • Delaunay
    • mesh improvement
    • recursion
    • LEPP
    Abstract
    Download Full Paper (Postscript Format)


Spielman, Daniel A., Shang-Hua Teng, Alper Ungor
    "Parallel Delaunay Refinement:Algorithms And Analyses", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.193-204, September 15-18 2002
    keywords:
    • finite element mesh generation
    • tetrahedral mesh generation
    • constrained Delaunay tetrahedralization
    • boundaryconformity
    • boundary recovery
    Abstract
    Download Full Paper (Postscript Format)


Suarez, J.P., A. Plaza and G.F. Carey
    "Propagation path properties in iterative longest-edge refinement", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.79-90, Sept. 2003
    keywords:
    • LEPP
    • longest-edge bisection
    • refinement
    • triangle
    • propagation path
    Abstract
    Download Full Paper (Postscript Format)


Surazhsky, Vitaly and Craig Gotsman
    "High Quality Compatible Triangulations", Proceedings, 11th International Meshing Roundtable, Springer-Verlag, pp.183-192, September 15-18 2002
    keywords:
    • mesh generation
    • compatible triangulations
    • remeshing
    Abstract
    Download Full Paper (Postscript Format)


Surazhsky, Vitaly, Pierre Alliez and Craig Gotsman
    "Isotropic remeshing of surfaces: a local parameterization approach", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.215-224, Sept. 2003
    keywords:
    • surface meshing
    • triangle
    • centroidal Voronoi tessellation
    • local parameterization
    • parameterization
    • faceted surface representations
    Abstract
    Download Full Paper (Postscript Format)


Suflner, Gerd and Gunther Greiner
    "Hexagonal Delaunay Triangulation", Proceedings, 18th International Meshing Roundtable, Springer-Verlag, pp.519-538, October 25-28 2009
    keywords:
    • Unstructured Mesh Generation
    • Delaunay Triangulation
    • GuaranteedAngle Bounds
    • Hexagon Subdivision.
    Abstract
    Download Full Paper (Postscript Format)


Tournois, Jane, Pierre Alliez, and Olivier Devillers
    "Interleaving Delaunay Refinement and Optimization for 2D Triangle Mesh Generation", Proceedings, 16th International Meshing Roundtable, Springer-Verlag, pp.83-101, October 14-17 2007
    keywords:
    • 2D triangle mesh generation
    • Delaunay refinement
    • optimization
    • mesh smoothing
    • bounded Voronoi diagram.
    Abstract
    Download Full Paper (Postscript Format)


Tremel, Udo, Frank Deister, Oubay Hassan and Nigel P. Weatherill
    "Parallel generation of unstructured surface grids", Proceedings, 12th International Meshing Roundtable, Sandia National Laboratories, pp.43-53, Sept. 2003
    keywords:
    • surface meshing
    • geometry rasterisation
    • MPI
    • parallel
    • object-oriented
    • triangle
    • sizing function
    Abstract
    Download Full Paper (Postscript Format)


Tristano, Joseph R., Steven J. Owen, and Scott A. Canann
    "Advancing Front Surface Mesh Generation in Parametric Space Using a RiemannianSurface Definition", 7th International Meshing Roundtable, Sandia National Labs, pp.429-445, October 1998
    keywords:
    • triangle
    • surface meshing
    • Rieman space
    • advancing front
    Abstract
    Download Full Paper (Postscript Format)


Ungˆr, Alper, Alla Sheffer
    "Tent-Pitcher: A Meshing Algorithm for Space-Time Discontinuous Galerkin Methods", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.111-122, October 2000
    keywords:
    • space-time meshes
    • cone constraint
    • simplicial meshes
    • tetrahedra
    Abstract
    Download Full Paper (Postscript Format)


Viswanath, Naveen, Kenji Shimada, Takayuki Itoh
    "Quadrilateral Meshing with Anisotropy and Directionality Control via Close Packing of Rectangular Cells", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.217-225, October 2000
    keywords:
    • anisotropy
    • computational geometry
    • quadrilateral
    • circumcircle test
    • bubble packing
    • Delaunay
    • quadrilateral packing
    Abstract
    Download Full Paper (Postscript Format)


Wang, Feng and Luca Di Mare
    "On The Robust Construction of Constrained Delaunay Tetrahedralizations", Research Notes, 20th International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 23-26 2011
    keywords:
    • Constrained Delaunay Tetrahedralization
    • CDT
    • Piecewise Linear Complex
    • PLC
    • TetGen
    Abstract
    Download Full Paper (Postscript Format)


Xu, Jing, Andrey N. Chernikov
    "A sufficient condition of validity for cubic Bezier triangles", 24th International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-14 2015
    keywords:
    • validity
    • Jacobian
    • Bezier triangle
    • curvilinear mesh
    Abstract
    Download Full Paper (Postscript Format)


Yamada, Atsushi, Kenji Shimada and Takayuki Itoh
    "Energy-Minimizing Approach to Meshing Curved Wire-Frame Models", 5th International Meshing Roundtable, Sandia National Laboratories, pp.179-194, October 1996
    keywords:
    • bubble
    • energy-minimization
    • sphere packing
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Yamakawa, Soji and Kenji Shimada
    "High Quality Anisotropic Tetrahedral Mesh Generation Via Ellipsoidal Bubble Packing", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.263-273, October 2000
    keywords:
    • tetrahedra
    • bubble packing
    • anisotropy
    • graded mesh
    • ellipsoid
    • advancing front
    • physically-based
    Abstract
    Download Full Paper (Postscript Format)


Yanamadala, J., V. K. Rathi, S. Maliye, H. A. Win, A. L. Tran, M. K. Kozlov, G. M. Noetscher, A. Nazarian, and S. N. Makarov
    "Segmentation of the Visible Human Project(VHP) Female Cryosection Images within MATLAB Environment", 23rd International Meshing Roundtable, Elsevier Ltd., pp.Research Note, October 12-15 2014
    keywords:
    • Image segmentation
    • MATLAB
    • Visible Human Project(VHP)
    • triangular surface meshes
    • mesh intersection
    Abstract
    Download Full Paper (Postscript Format)


Yin, Xiaotian, Wei Han, Xianfeng Gu, and Shing-Tung Yau
    "The Cutting Pattern Problem for Tetrahedral MeshGeneration", 20th International Meshing Roundtable, Springer-Verlag, pp.217-236, October 23-26 2011
    keywords:
    • cutting pattern
    • graph labeling
    • tetrahedral mesh
    • prism
    Abstract
    Download Full Paper (Postscript Format)


Yin, Xiaotian, Wei Han, Xianfeng Gu, and Shing-Tung Yau
    "Tetrahedral Mesh Construction for Unit Tangent Bundle over Genus-Zero Surfaces", Research Notes, 21st International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 7-10 2012
    keywords:
    • unit tangent bundle
    • 2-spheres
    • tetrahedral meshes
    Abstract
    Download Full Paper (Postscript Format)


Zhou, Tian and Kenji Shimada
    "An Angle-Based Approach to Two-Dimensional Mesh Smoothing", Proceedings, 9th International Meshing Roundtable, Sandia National Laboratories, pp.373-384, October 2000
    keywords:
    • smoothing
    • average angle
    • Laplacian
    • optimization-based
    • triangule
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


Zwart, P. J. and G. D. Raithby
    "Space-Time Meshing for Two-Dimensional Moving Boundary Problems", Proceedings, 7th International Meshing Roundtable, Sandia National Lab, pp.187-200, October 1998
    keywords:
    • space-time
    • time slab
    • moving boundary
    • triangle
    Abstract
    Download Full Paper (Postscript Format)


Contact author(s) or publisher for availability and copyright information on above referenced articles