carrier image

Matthew L. Staten

Sandia National Laboratories
Albuquerque, NM U.S.A.
E-mail: mlstate@sandia.gov

MESHING
RESEARCH
CORNER

Canann, Scott A., Joseph R. Tristano, Matthew L. Staten

    "An Approach to Combined Laplacian and Optimization-Based Smoothing for Triangular, Quadrilateral, and Quad-Dominant Meshes", 7th International Meshing Roundtable, Sandia National Labs, pp.479-494, October 1998
    keywords:
    • smoothing
    • Laplacian smoothing
    • optimization-based smoothing
    • triangle
    • quadrilateral
    • metric
    Abstract
    Download Full Paper (Postscript Format)


Dewey, Mark W., Steven E. Benzley, Jason F. Shepherd, and Matthew L. Staten
    "Automated Quadrilateral Coarsening by Ring Collapse", Proceedings, 17th International Meshing Roundtable, Springer-Verlag, pp.93-106, October 12-15 2008 Abstract
    Download Full Paper (Postscript Format)


Ledoux, Franck, Nicolas Le Goff, Steve J. Owen , Matthew L. Staten and Jean-Christophe Weill
    "A Constraint-Based System to Ensure the Preservation of Sharp Geometric Features in Hexahedral Meshes", 21st International Meshing Roundtable, Springer-Verlag, pp.315-332, October 7-10 2012
    keywords:
    • hexahedral mesh modification
    • topology of CAD models
    • fundamental sheets
    • sheet insertion
    • constraint-based system
    Abstract
    Download Full Paper (Postscript Format)


Miller, Tim I., Steven E. Benzley, Steven J. Owen, and Matthew L. Staten
    "Using Edge Valence Prediction to Drive Localized All-Hex Coarsening", Research Notes, 20th International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 23-26 2011
    keywords:
    • Hexahedra
    • Coarsening
    • Mesh Topology Modification
    • Edge Valence
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J., Matthew L. Staten, Marguerite C. Sorensen
    "Parallel Hex Meshing from Volume Fractions", 20th International Meshing Roundtable, Springer-Verlag, pp.161-178, October 23-26 2011
    keywords:
    • grid-based
    • overlay grid
    • hexahedral mesh generation
    • parallel meshing
    • non-manifold
    Abstract
    Download Full Paper (Postscript Format)


Owen, Steven J., Matthew L. Staten, Scott A. Canann, and Sunil Saigal
    "Advancing Front Quadrilateral Meshing Using Triangle Transformations", 7th International Meshing Roundtable, Sandia National Labs, pp.409-428, October 1998
    keywords:
    • Q-morph
    • quadrilateral
    • advancing front
    • surface meshing
    • edge recovery
    • surface meshing
    Abstract
    Download Full Paper (Postscript Format)


Parrish, Michael, Michael Borden, Matthew Staten, Steven Benzley
    "A Selective Approach to Conformal Refinement of Unstructured Hexahedral Finite Element Meshes", Proceedings, 16th International Meshing Roundtable, Springer-Verlag, pp.251-268, October 14-17 2007 Abstract
    Download Full Paper (Postscript Format)


Staten, Matthew L., Jason F. Shepherd, and Kenji Shimada
    "Mesh Matching - Creating Conforming Interfaces between Hexahedral Meshes", Proceedings, 17th International Meshing Roundtable, Springer-Verlag, pp.467-484, October 12-15 2008 Abstract
    Download Full Paper (Postscript Format)


Staten, Matthew L., Robert A. Kerr, Steven J. Owen, Ted D. Blacker
    "Unconstrained Paving and Plastering: Progress Update", Proceedings, 15th International Meshing Roundtable, Springer-Verlag, pp.469-486, September 17-20 2006
    keywords:
    • unconstrained plastering
    • unconstrained paving
    • hexahedra
    • quadrilateral
    Abstract
    Download Full Paper (Postscript Format)


Staten, Matthew L., Scott A. Canann, and Steve J. Owen
    "BMSWEEP: Locating Interior Nodes During Sweeping", 7th International Meshing Roundtable, Sandia National Labs, pp.7-18, October 1998
    keywords:
    • hexahedra
    • sweeping
    • node location
    • BMSweep
    Abstract
    Download Full Paper (Postscript Format)


Staten, Matthew L., Steven J. Owen, Suzanne M. Shontz, Andrew G. Salinger and Todd S. Coffey
    "A Comparison of Mesh Morphing Methods for 3D Shape Optimization", 20th International Meshing Roundtable, Springer-Verlag, pp.293-310, October 23-26 2011
    keywords:
    • mesh morphing
    • mesh moving
    • mesh warping
    Abstract
    Download Full Paper (Postscript Format)


Staten, Matthew L., Steven J. Owen, Ted D. Blacker
    "Unconstrained Paving & Plastering: A New Idea for All Hexahedral Mesh Generation", Proceedings, 14th International Meshing Roundtable, Springer-Verlag, pp.399-416, September 11-14 2005
    keywords:
    • hexahedra
    • plastering
    • sweeping
    • paving
    Abstract
    Download Full Paper (Postscript Format)


Steven J. Owen and Matthew L. Staten
    "A Comparison of Mesh Morphing Methods for Shape Optimization", Research Notes, 19th International Meshing Roundtable, Springer-Verlag, pp.Research Note, October 3-6 2010
    keywords:
    • .
    Abstract
    Download Full Paper (Postscript Format)


Woodbury, Adam C., Jason F. Shepherd, Matthew L. Statenand Steven E. Benzley
    "Localized Coarsening of ConformingAll-Hexahedral Meshes", Proceedings, 17th International Meshing Roundtable, Springer-Verlag, pp.603-618, October 12-15 2008
    keywords:
    • Hexahedral
    • Mesh
    • Coarsening
    • Simplification
    • Adaptivity
    • Refinement.
    Abstract
    Download Full Paper (Postscript Format)


Contact author(s) or publisher for availability and copyright information on above referenced articles